write a short composition sequencing the steps in how to:
patch a tire
start a car
change gearHow is a tyre patched?Tire Patch:
1. Remove tire/wheel assemble from vehicle, mark tire at valve stem area so that tire can be mounted in same spot so not to require to be balanced
2. Find puncture and remove object, marking location of puncture.
3. Bleed air from tire, then seperatre tire from wheel
4. Clean inside of tire at puncture area, sand smooth.
5. Glue and patch puncture.
6. Replace tire on rim, set bead and fill tire to proper pressure.
7. Mount on vehicle.
Start car:
1. Get inside car, insert key into ignition
2. hold brake and clutch (if manual and place in neutral) and turn key to start.
3. Release key, brake and clutch
4. Do whatever you want, drive off, let idle to warm up
Change gear:
push in clutch, make gear selection, release clutch (more to it than that, but it will make it happen
